Video camera inspection
We run a RIDGID SeeSnake camera through the full line and record it. You watch the monitor with us. You get a copy of the footage. This is included on every job, no extra charge.
Trenchless options, upfront pricing, and tested repairs
Sewer line replacement Victoria TX done right the first time
When your sewer backs up twice in a month, or you spot water pooling on the floor near a slab crack, you need sewer line replacement Victoria TX homeowners can count on. We run a video camera down the line, show you exactly what failed, and give you a flat price before we cut anything. Most jobs wrap in one to three days.
Careful work. Honest options.
About this service
What sewer line replacement Victoria TX actually involves
Sewer line replacement Victoria TX is the full removal and replacement of the underground pipe that carries waste from your home to the city main. We start with a video pipe inspection camera to map the run, then use pipe locators to mark the exact path across your yard or under your slab. Failed sections come out, new PVC pipes go in, and we pressure-test the line before backfilling. No guesswork, no open trench across the whole yard if we can avoid it.
Most calls we get in Victoria County start the same way: a slow drain that turns into a backup, or a high water bill with no visible leak. Cast iron pipes from the 1950s and 1960s are the usual suspects, especially in older neighborhoods where tree roots have worked into the joints for decades. If you have been searching for sewer line replacement near me Victoria and getting vague answers, we will tell you straight whether you need a repair or a full replacement.
- ✓ Stop repeat backups
- ✓ Lower water bills
- ✓ Protect your foundation
- ✓ Add real resale value
What's included
What is included in sewer line replacement
Every sewer line replacement Victoria job includes the full scope from inspection to final walkthrough. Here is what is covered and what we handle as an add-on if needed.
Line locating and marking
Pipe locators and acoustic listening devices trace the exact path of the sewer line. We mark it on the ground so you can see where we will dig. Utility lines get marked before we break ground.
Excavation and pipe installation
We dig the trench or tunnel under the slab, remove the old pipe, and install new PVC pipe at the correct grade. Couplings are solvent-welded. The line is pressure-tested before backfill.
Backfill and compaction
After testing, we backfill with the right material and compact it in lifts. This prevents settling that could shift the new pipe. We grade the surface so water drains away from the trench.
Concrete patch and restoration
If we opened a slab, we patch it with concrete patch mix matched to your existing slab. The goal is a floor that looks untouched. We finish the patch before we call the job complete.
Documentation
You get before-and-after camera footage of the new pipe.
How it works
How our sewer line replacement process works
We run a RIDGID SeeSnake camera through the line and record the full run. You watch the monitor with us. You see the crack, the root mass, the collapsed section, or the bellied pipe. This takes 30 to 45 minutes and tells us whether you need a spot repair or a full replacement.
We use pipe locators and acoustic listening devices to trace the exact path of the sewer line across your yard or under your slab. Utility lines get marked. You get a written flat price before any digging starts. No hourly billing, no change orders unless you approve them.
If the line runs through the yard, we dig a targeted trench, usually 3 to 5 feet deep. If it runs under the slab, we use trenchless tunneling equipment to bore under the foundation instead of cutting a full trench through your floor. Most yard runs take one day to expose.
Old cast iron or galvanized pipe comes out. New PVC pipe goes in, sloped at the correct grade per Texas plumbing code. Couplings are solvent-welded. We pressure-test the new line with water before backfilling anything. If it fails, we fix it before you see a bill.
We backfill, compact the soil, and patch concrete where needed. You get a walkthrough of the finished work and the camera footage of the new line. Most jobs are complete in one to three days depending on depth and slab involvement.
STEP 01Camera inspection
We run a RIDGID SeeSnake camera through the line and record the full run. You watch the monitor with us. You see the crack, the root mass, the collapsed section, or the bellied pipe. This takes 30 to 45 minutes and tells us whether you need a spot repair or a full replacement.
Tools & methods
Tools and methods we use
RIDGID SeeSnake camera
Records the full interior of the sewer line so you can see the cracks, roots, and blockages yourself. We use it before and after every replacement.
Pipe locators
Traces the exact path of the underground sewer line so we dig in the right spot. This keeps the trench small and the yard intact.
Acoustic listening devices
Picks up the sound of water escaping under a slab. We use it to confirm the leak point before we open anything up.
Thermal imaging cameras
FLIR cameras show temperature differences that reveal hidden leaks. If you have hot spots on the floor, this is how we find the source.
Trenchless tunneling equipment
Boars under slabs and driveways to run new pipe without cutting a full trench. Saves concrete work and landscaping costs.
Pressure testing gauges
Tests the new line under pressure before we backfill. If it fails, we fix it before you see a bill.
Problems we solve
Sewer problems we fix for Victoria homeowners
These are the calls we get most often in Victoria County. If any of these sound familiar, call us before it gets worse.
Ask a pro →Sewage backing up into the house
We camera the line to find the blockage or collapse, then replace the failed section or the full run. Most backups clear the same day we inspect, and the permanent fix is scheduled within the week.
High water bill with no visible leak
We use moisture meters, pressure testing gauges, and thermal imaging cameras to find the leak. Once we confirm it is on the sewer line, we replace the pipe and stop the water loss.
Water pooling in the yard near the foundation
We locate the leak with acoustic listening devices and pipe locators, then excavate and replace the failed pipe. The yard is backfilled and graded so water drains away from the house.
Recurring clogs in the same drain
We camera the line to see what is actually happening. If roots are entering through cracked joints, we replace the pipe with seamless PVC. No joints, no root entry points, no repeat clogs.
We camera-inspect the line, locate it with pipe locators, then either trench the yard or tunnel under the slab. Old pipe comes out, new PVC goes in at the correct grade, and we pressure-test before backfilling. Most jobs take one to three days. Ask for before-and-after footage at the walkthrough.
Sewer pipe replacement Victoria Texas means removing the failed underground waste line and installing a new one. It is different from a spot repair, which fixes one section. We recommend full replacement when the pipe is cast iron, has multiple cracks, or has root intrusion along more than 30 percent of its length.
Typical 2026 pricing in Victoria runs $4,500 to $12,000 for a full replacement, depending on depth, length, and whether the line runs under a slab. Trenchless runs cost more upfront but save on concrete and landscaping. We give you a flat written price after the camera inspection, before any digging starts.
Replace it when you have had two or more backups in 12 months, when camera footage shows cast iron pipe with widespread corrosion, or when you see water pooling near the foundation with no other cause. A pinhole leak under a slab will not fix itself. Waiting usually means a bigger repair and a higher bill.
Ready when you are
Get your sewer line replacement Victoria TX quote today
We camera the line, show you the problem, and give you a flat price before we dig. Same-day estimates available. Call now and we will schedule your inspection.
Book Inspection 83157330144 →
Request an appointment
Contact SlabFix Repair
Call us at 831-573-30144 any time, day or night. We answer emergency calls 24/7 and schedule standard appointments Monday through Friday. If you're not sure whether you have a slab leak, call anyway and we'll help you figure out the next step.