Our Services

Our Slab Leak Repair Services

We cover the full scope of Slab Leak Repair Victoria TX work, from the first listening test to the final concrete patch. Whether it's a pinhole leak under a hallway floor or a full under-slab pipe replacement in an older Victoria County home, we can connect you with help. Call for affordable slab leak repair in Victoria Texas.

Upfront optionsNo work before you approve it

Respectful serviceClean floors, clear communication

Clear next stepsKnow the plan before work starts

Local providersHelp from your area

What we do

Our Slab Leak Repair Services

SlabFix Repair — Slab Leak Repair you can rely on

Most requested

Slab Leak Detection

We use acoustic listening devices and pressure testing gauges to confirm whether the leak is under the slab or in a wall. Most Victoria homes we test are diagnosed in under two hours, and you get a clear answer before any concrete is opened.

Explore →

Prevent damage

Electronic Leak Detection

Electronic leak detection equipment traces the exact path of a leaking line under your floor. We run the signal along the pipe, mark the break on the slab, and confirm the spot with a moisture meter before we cut. Accurate locating saves you hundreds in unnecessary concrete work.

Explore →

SlabFix Repair — your local Slab Leak Repair team

Available 24/7

Thermal Imaging Leak Detection

A FLIR thermal imaging camera shows us hot spots on the floor from a leaking hot water line. It's fast, non-invasive, and works well on tile and hardwood where we don't want to pull up flooring. We use it alongside acoustic testing for a second confirmation.

Explore →

04Acoustic Leak DetectionAcoustic listening devices pick up the sound of pressurized water escaping a pipe under the slab. We isolate the frequency, walk the line, and narrow the break to within a few inches. It's the first tool we reach for on most Slab Leak Repair Victoria TX calls.↗05Under Slab Pipe RepairOnce we've located the break, we open the slab, cut out the damaged section, and replace it with new copper or PEX. We pressure-test the repair before backfilling, so you know the line holds before the concrete goes back down.↗06Under Slab Pipe ReplacementWhen a line is corroded end to end, patching one spot just moves the problem. We replace the full run under the slab with PEX or copper, reroute where it makes sense, and restore the floor. Most replacements are done in one to two days.↗07Tunneling for Slab LeaksSometimes the smartest repair is a tunnel under the foundation instead of cutting the floor. We dig a clean access tunnel, make the repair from below, and backfill it properly. Your flooring and tile stay untouched, and you avoid a major restoration bill.↗08Concrete Breaking and RemovalWe cut and break concrete with concrete saws and jackhammers only where the leak actually is. Our locators mark the spot first, so the opening stays small. We haul off the debris the same day and keep the work area as clean as we can.↗09Concrete Patch and RestorationAfter the repair passes pressure testing, we backfill and pour a concrete patch mix that matches the surrounding slab. We level it, finish it, and leave you with a floor that's ready for tile, carpet, or hardwood once it cures.↗10Foundation Leak RepairWater under a slab can move soil and crack the foundation. We find the source, stop the leak, and check for foundation movement around the repair area. Left alone, a small under-slab leak can turn into a much bigger structural bill.↗11Water Line RepairA leaking main or branch water line shows up as a high water bill or a wet spot that never dries. We isolate the line, locate the break, and repair it with code-correct couplings and pipe clamps. Most water line repairs are finished the same day.↗12Water Line ReplacementGalvanized pipes and older copper lines in Victoria homes often fail in more than one place. When that happens, we replace the full run rather than chasing leaks. New PEX or copper, pressure-tested, and backfilled the right way.↗13Sewer Line RepairA backed-up drain or a sewage smell in the yard usually means a broken sewer line. We run a video pipe inspection camera to see the break, then repair the damaged section. We handle both under-slab and exterior sewer line repairs.↗14Sewer Line ReplacementWhen a sewer line is collapsed or root-invaded along its length, replacement is the honest answer. We replace the run with PVC, restore the slab or yard, and test the line before we call it done. Most replacements take one to three days.↗15Drain Line RepairSlow drains throughout the house often point to a broken drain line under the slab. We camera the line, locate the failure, and repair it. You get normal drainage back and a clear answer on what caused the problem in the first place.↗16Drain Line ReplacementOld cast iron drain lines rust from the inside out and eventually fail. We replace the failed run with PVC, tie it into the existing system, and test it. This is common work in older Victoria County homes with original plumbing.↗17Pipe ReroutingSometimes the cleanest fix is to move the line instead of repairing it in place. We reroute under-slab piping through walls or the attic to avoid future slab work. It's a smart option when a line has already been repaired more than once.↗18Pipe ReliningPipe relining lets us repair a failing line from the inside without digging it up. We pull an epoxy liner through the pipe, cure it, and leave you with a smooth, sealed interior. It's a good fit for drain and sewer lines that are cracked but still intact.↗19Epoxy Pipe LiningEpoxy pipe lining seals pinholes, small cracks, and joint leaks without opening the slab. We clean the line, apply the epoxy, and cure it in place. It's a lower-mess option for the right kind of pipe failure, and we'll tell you honestly if it fits.↗20Pinhole Leak RepairPinhole leaks in copper pipes are one of the most common slab leak calls we get. They start small and quietly soak the soil under your floor. We locate the pinhole, cut out the damaged copper, and splice in a new section.↗21Copper Pipe Leak RepairCopper pipes fail from corrosion, bad water chemistry, and age. We repair copper leaks with proper couplings and, when needed, replace the section with new copper or PEX. We pressure-test every repair before closing up.↗22PEX Pipe RepairPEX is durable, but it can still be damaged by rodents, kinks, or bad fittings. We repair PEX lines with the correct fittings and crimp rings, then pressure-test the line. Most PEX repairs are quick once we've located the break.↗23PVC Pipe RepairPVC drain and water lines crack at joints and fittings. We cut out the failed section, glue in a new piece, and test it. This is common work on newer Victoria homes where PVC was used under the slab.↗24Cast Iron Pipe RepairCast iron pipes rust and scale from the inside, and they eventually leak or block. We repair the failed section or replace the run with PVC. If your Victoria home still has original cast iron, it's worth having us camera the line.↗25Galvanized Pipe ReplacementGalvanized pipes corrode shut over time and leak at the threads. We replace galvanized runs with PEX or copper, restore water pressure, and clean up the water quality issues that come with old steel pipe. Most replacements are done in a day or two.↗26Water Heater Leak RepairA leaking water heater can look like a slab leak when the water runs under the floor. We check the tank, fittings, and T&P valve first, then trace the water to its real source. If it's the heater, we repair or replace it.↗27Water Heater ReplacementWhen a tank is rusted through or the bottom is weeping, replacement is the right call. We remove the old unit, install the new one to code, and test every connection. Same-day replacement is often possible when you call early.↗28Pressure Regulator Valve RepairHigh water pressure wears out pipes and fittings and can cause slab leaks over time. We test your incoming pressure, repair or replace the regulator valve, and set it to a safe range. It's a small fix that protects the whole system.↗29Main Water Shut-Off Valve RepairA stuck or leaking main shut-off valve leaves you with no way to stop water in an emergency. We repair or replace the valve, test it under pressure, and show you how to shut the water off fast if you ever need to.↗

From call to complete

How Our Slab Leak Repair Works

You call 831-573-30144, tell us what you're seeing, and we book a time that works. For active leaks, we prioritize same-day. You'll get a call when the technician is on the way.

We run acoustic, electronic, and thermal tests to pinpoint the break. You watch the readings with us if you want. By the end of this step, we know exactly where the problem is and what it will take to fix it.

We open the slab at the marked spot, repair or replace the failed pipe, and pressure-test the line. Nothing gets closed up until it holds pressure. This is where a good repair is separated from a quick patch.

We backfill, pour the concrete patch, and finish it level with the surrounding slab. We haul off debris and leave the area clean. You get a walkthrough of what we did and how to reach us if anything comes up.

STEP 01Call and Schedule

You call 831-573-30144, tell us what you're seeing, and we book a time that works. For active leaks, we prioritize same-day. You'll get a call when the technician is on the way.

Our standard

Why Victoria Homeowners Choose Us

We're a free referral line for local plumbing providers. When you call, we connect you with a local provider who knows Victoria County homes, the soil, and the plumbing problems that come with them. Here's what that means for you.

⌂

Local Slab Leak Providers

Texas requires plumbers to be licensed by the Texas State Board of Plumbing Examiners, so ask your provider for their license number before work starts. We pull permits when the job requires them and work to current code. You're covered, and the work is done right.

◎

Same-Day Emergency Response

Slab leaks don't wait for business hours. We run 24/7 emergency slab leak repair Victoria TX calls, and most emergency jobs get a technician on site the same day. If water is actively running under your floor, call us and we'll move fast.

Accurate Locating Saves You Money

We invest in LeakTronics and SubSurface Instruments locating gear because guessing costs you concrete and money. We mark the exact break before we cut, which keeps the opening small and the repair affordable. That's how we keep leak detection in Victoria honest.

Good questions

Slab Leak Repair Victoria TX FAQs

Here are the questions we get most often from Victoria homeowners dealing with slab leaks. If yours isn't here, call us and we'll answer it straight.

83157330144 →

Most spot repairs in Victoria run $1,200 to $2,800, and locating-only visits are $189 to $349. Full under-slab line replacements run $3,500 to $8,500 depending on length and access. We give you a written price before any concrete is cut, so there are no surprises.

Look for a company that locates the leak accurately before cutting, can show a current TSBPE license, and gives you a written price upfront. Ask about all three before you hire. Ask any plumber you call how they locate leaks and whether they pressure-test the repair. Those two answers tell you a lot.

If you have a high water bill, a warm spot on the floor, or water pooling with no visible source, yes. Leak detection confirms whether the problem is under the slab or somewhere else, so you don't pay for unnecessary concrete work. It's the cheapest step in the whole process.

It depends on your policy. Many Texas homeowner policies cover the water damage and access (cutting the slab), but not the pipe repair itself. We document the leak with photos and readings so you have what your adjuster needs. Call your insurer before we start if you plan to file.

We run 24/7 emergency service, and most emergency calls in Victoria get a technician on site the same day. If water is actively running under your floor, shut off the main valve and call 831-573-30144. We'll tell you exactly when we'll arrive.

Ready when you are

Need Slab Leak Repair Victoria TX Today?

Water under your slab doesn't fix itself. Call SlabFix Repair at 831-573-30144 for same-day locating and repair across Victoria County. Ask about pricing before any work begins.

Call 831-573-30144 →

Request an appointment

Contact SlabFix Repair

Call us at 831-573-30144 any time, day or night. We answer emergency calls 24/7 and schedule standard appointments Monday through Friday. If you're not sure whether you have a slab leak, call anyway and we'll help you figure out the next step.

Call anytime83157330144 Email the office[email protected]

Office hoursOpen 24 hours · 7 days a week