Full Pressure Test
We isolate hot and cold, pressurize each side, and watch the gauge. This tells us which system is leaking and rules out false positives before we bring in the electronics.
Pinpoint slab leaks under your floor before we cut concrete
Electronic Leak Detection Victoria TX That Finds the Leak First Time
When your water bill spikes and the floor stays warm, electronic leak detection Victoria TX is how we find the break without tearing up your whole house. We run pressurized lines, sweep the slab with acoustic and thermal gear, and mark the exact spot before a single concrete saw touches your floor. Homeowners across Victoria County call us because we locate first and repair second.
Careful work. Honest options.
About this service
Electronic Leak Detection Victoria TX Done Right
Electronic leak detection Victoria TX is a non-invasive diagnostic service that uses acoustic listening devices, thermal imaging cameras, and pressure testing gauges to pinpoint where water is escaping under a slab, inside a wall, or beneath a driveway. We pressurize the line, listen for the hiss of a pinhole leak, and watch for hot spots on the floor with a FLIR camera. The result is a marked location you can trust before anyone breaks concrete.
Victoria sits on expansive clay soils that shift with every wet and dry cycle, and that movement cracks slabs and shears copper pipes underneath them. Older homes in central Victoria still run galvanized and cast iron lines that corrode from the inside out. If you have noticed water pooling on the floor, a water bill that jumped $80 in one month, or a warm patch under the tile, our digital leak detection Victoria Texas service finds the source before it undermines your foundation.
- ✓ No Guesswork Demolition
- ✓ Lower Water Bills Fast
- ✓ Protects Your Foundation
- ✓ Same-Day Answers
What's included
What Electronic Leak Detection Includes
Every detection visit includes the full diagnostic sequence, not just a quick listen. Here is what you get when we show up, and what we handle separately if the repair turns out to be more than a spot fix.
Acoustic and Thermal Sweep
We walk the slab with listening devices and a FLIR thermal camera to pinpoint the leak location. On copper lines we can usually narrow it to a 6-inch circle.
Marked Location and Report
You get the leak marked on the floor, photographed, and documented. If you want a second opinion or need to file an insurance claim, the report is ready to share.
Flat Repair Quote
Once we know where the leak is, we give you a flat price for the repair. No hourly meter, no surprise add-ons. You approve before we cut.
Post-Repair Pressure Test
After the repair, we pressure test the line again and confirm it holds. You see the gauge reading before we backfill and pour concrete patch.
Concrete Patch and Cleanup
We backfill, pour concrete patch mix, and clean up the work area. Most patches are walkable within 24 hours and ready for flooring shortly after.
How it works
How Our Leak Detection Process Works
You call, we ask three questions: where is the water showing up, has the bill jumped, and is the floor warm anywhere. That tells us whether we are chasing a slab leak, a water line, or a drain. We book a same-day or next-morning window, usually within 2 to 4 hours.
We shut off the main, isolate the hot and cold sides, and pressurize each with a gauge. A line that will not hold pressure has a leak. This step takes 20 to 30 minutes and tells us which system we are hunting before we bring in the electronics.
We walk the slab with acoustic listening devices and a FLIR thermal camera, watching for hot spots and listening for the signature hiss of escaping water. On copper lines we can often narrow the leak to a 6-inch circle. This is the core of electronic leak detection Victoria TX.
We mark the spot with paint and photograph it. If the leak is under tile or carpet, we tell you exactly what has to come up. You get a written location, a repair recommendation, and a flat price before we pick up a concrete saw.
Once you approve, we open the slab, repair or replace the failed section with copper or PEX, and pressure test again. We backfill, pour concrete patch mix, and leave the line holding pressure. Most repairs finish the same day as detection.
STEP 01Phone Intake
You call, we ask three questions: where is the water showing up, has the bill jumped, and is the floor warm anywhere. That tells us whether we are chasing a slab leak, a water line, or a drain. We book a same-day or next-morning window, usually within 2 to 4 hours.
Tools & methods
Tools and Methods We Use
Acoustic Listening Devices
Pick up the sound of pressurized water escaping a pinhole leak. We use LeakTronics gear to narrow the leak to a small area before we cut.
FLIR Thermal Imaging Cameras
Read temperature differences on the floor to reveal hot water leaks and hidden moisture. Thermal imaging confirms what acoustic gear hears.
RIDGID SeeSnake Cameras
Video pipe inspection for drain and sewer lines. We run the camera to confirm breaks, root intrusion, and pipe condition before recommending a repair.
Pressure Testing Gauges
Isolate hot and cold lines and pressurize each side. A line that will not hold pressure has a leak, and this tells us which system to hunt.
Moisture Meters
Confirm moisture in flooring, drywall, and slab. We use them to trace the leak back to its source and verify the area is dry after repair.
Pipe Locators
Map the path of under-slab lines so we know exactly where the pipe runs before we open concrete. This keeps openings small and repairs precise.
Problems we solve
Problems Electronic Leak Detection Solves
Most Victoria homeowners call us with one of these four problems. Each one has a specific fix once we know where the leak is.
Ask a pro →Water bill jumped with no visible leak
We pressure test both sides, sweep the slab with acoustic and thermal gear, and mark the leak. Most hidden leaks are found within two to four hours and repaired the same day.
Warm spot on the floor or hot water running constantly
Thermal imaging catches the hot spot immediately. We confirm with acoustic listening, mark the location, and repair the copper or PEX line under the slab.
Water pooling on the floor with no obvious source
We trace the moisture back to the source with moisture meters and electronic detection, then repair the failed line and dry the area before patching the slab.
Foundation cracks and sticking doors after a wet season
We locate the source with electronic leak detection Victoria TX, repair the line, and stop the water from feeding the soil. Most foundation movement stops once the leak is fixed.
We pressurize the suspect line, then walk the slab with acoustic listening devices and a thermal imaging camera to hear and see where water is escaping. A copper pinhole leak usually shows as a hot spot on the floor and a distinct hiss through the headphones. Most detections take two to four hours and end with a marked location within a few inches.
Digital leak detection is the same service under a different name: electronic tools instead of eyes and guesswork. We use digital pressure gauges, FLIR thermal cameras, and LeakTronics acoustic gear to find leaks under slabs, in walls, and under driveways. It is non-invasive, accurate, and far cheaper than exploratory demolition.
Typical 2026 pricing in Victoria runs $250 to $550 for detection alone, depending on how many lines we test and how large the slab is. If we also repair the leak, we credit part of the detection fee toward the repair. You get the flat price in writing before we start.
They work best together. Acoustic listening pinpoints the hiss of escaping water; electronics like thermal imaging confirm the location and catch leaks that are not making noise yet. We run both on every job because one without the other leaves too much room for error under a slab.
Ready when you are
Book Electronic Leak Detection Victoria TX Today
If your water bill jumped, your floor is warm, or you hear water running with everything off, call us. Ask your provider about licensing and insurance before work starts. Same-day detection, flat pricing, and a marked location before we cut.
Book Detection Now 83157330144 →
Request an appointment
Contact SlabFix Repair
Call us at 831-573-30144 any time, day or night. We answer emergency calls 24/7 and schedule standard appointments Monday through Friday. If you're not sure whether you have a slab leak, call anyway and we'll help you figure out the next step.